In recent years, with the development of the society and labor costs rise year by year, the factory's recruitment difficult, the problem of high labor costs, more and more manufacturers hope automation equipment is used to solve the problem of employment is difficult, but mostly because the automation equipment according to the product for development, so a lot of manufacturers in the actual manufacturing process is not well reference standard, so here I just automation machinery and equipment manufacturing for you about the three principles:

I. technical principles

Technical principle refers to the mechanical equipment design, manufacture, use and other aspects of the performance indicators must meet the corresponding standards. It includes not only static technical index but also dynamic technical index. For example, mechanical equipment power, strength, service life, efficiency and other static technical indicators; Thermal stability, wear resistance, friction resistance and other dynamic technical indicators. Therefore, when carrying out the design work, the technical indexes of equipment parts must be ensured, and the use of equipment should not be affected.

2. Standardization principle

In the design of mechanical equipment, the standardization of all work must be ensured, which is mainly analyzed from two aspects: on the one hand, concept standardization. In the design process, there must be some professional terms, units of measurement, symbols and so on. In this way, relevant design standards must be met when designing. If errors occur, the normal use of mechanical equipment will be affected. Method standardization, on the other hand. When carrying out a design, if need to undertake relevant test, measure wait for a job, must be finished in designated place, in strict accordance with the method specified in concerned standard standard at the same time executive, assure the use performance of mechanical equipment.

Iii. Safety principles

In the process of designing, the following points should be paid attention to in terms of safety:

1) parts safety. The quality of the equipment parts must conform to the relevant design standards. At the same time, when used, it should be guaranteed that there will be no excessive deformation, fracture and other situations, so as to avoid the adverse impact of design.

2) work safety. When carrying out the design, be sure to guarantee the safety of the staff and ensure the smooth progress of related work.

3) environmental security. When designing, it is necessary to measure the impact of mechanical equipment on the surrounding environment, such as mechanical noise, waste gas pollution, etc., and take relevant preventive measures according to the actual situation.

The above three points are the main three principles for the design of automation equipment. In the actual design process, due to the characteristics and requirements of processed products, comprehensive consideration is made during the design to ensure the technical, standardized and safe principles of the design.